Landing Gear

Piper PA22 Nose Strut Seal Kit  (TC22S-1)  This kit contains all the seals, o rings and gaskets to rebuild  Piper PA 22 Nose Gear oleo struts.  

Piper PA23 Nose or Main Strut Seal Kit  (TC23S-1)  This kit contains all the seals, o rings and gaskets to rebuild  Piper PA 23 Series Nose or Main Gear oleo struts.  (1 kit per strut)  

Piper PA28 & PA32 Main Strut Seal Kit  (TPMS-1)  This kit contains all the seals, o rings and gaskets to rebuild many Piper Main struts. For Piper Models- PA-28, 140, 150, 151, 160, 161, 180, 181 & 235, PA-32, 260 and 300

Piper PA28 & PA32 Nose Strut Seal Kit  (TCNS-1)  This kit contains all the seals, o rings and gaskets to rebuild many Piper Nose Gear oleo struts. For Piper Models- PA-28, 140, 150, 151, 160, 161, 180, 181 & 235, PA-32, 260 and 300

This kit is for Piper models PA 28 with the 456/015 shimmy damper. O-rings vary in each kit.

This kit is for Piper models PA 28-236. O-rings vary in each kit.

Piper PA28R & PA32R Main Strut Seal Kit  (TCRMS-1)  This kit contains all the seals, o rings and gaskets to rebuild many Piper Main Gear oleo struts. For PA28R-180, -200, PA32R-300, 301, 301T & PA32RT-300, 300T

Piper PA28R & PA32R Nose Strut Seal Kit  (TCRNS-1)  This kit contains all the seals, o rings and gaskets to rebuild many Piper Nose Gear oleo struts. For PA28R-180, -200, PA32R-300, 301, 301T & PA32RT-300, 300T

This kit is for the Piper PA 28R series with the SFA232-5 actuator. O-rings vary in each kit.

This kit is for the Piper PA 28R series with the 35797-05 actuator. O-rings vary in each kit.

This kit is for the Piper PA 28R series with the 35797-03 actuator. O-rings vary in each kit.

This kit is for Piper models PA 28R201 with the 456-016 shimmy damper. O-rings vary in each kit.

TP30NS-1 Piper PA30 PA39 nose and main strut kit. Our kit replaces the worn or torn O-rings and seals on the Piper  and PA39 nose and main struts.  (Note:  each kit does (1) one strut.)

This kit is for Piper models PA 31 with the 015-00100 shimmy damper. O-rings very in each kit.

TP34MS-1 Piper PA34 nose and main strut service kit. The TP34MS-1  strut service kit replaces worn or leaking O-rings on the PA34-200 and 200T Seneca I and II models Note:  Each kit does (1) strut

TP38NS-1 Piper PA38 nose and main strut service kit. The TP34NS-1  strut service kit replaces worn or leaking O-rings on the PA38 Note:  Each kit does (1) strut

This kit is for the Piper PA 44 series with the 96860-02 actuator. O-rings vary in each kit.

TP44MS-1 Piper PA44 main strut service kit. The TP44MS-1  strut service kit replaces worn or leaking O-rings on the PA44 This kit is for  the 78723-29,30,31 Struts only Note:  Each kit does (1) strut

TP44MS-1 Piper PA44 main strut service kit. The TP44MS-1  strut service kit replaces worn or leaking O-rings on the PA44 This kit is for  the 78723-22, or -23 Struts only Note:  Each kit does (1) strut

TP44NS-1 Piper PA44 Nose strut service kit. The TP44NS-1  strut service kit replaces worn or leaking O-rings on the PA44 Nose strut This kit is for  the 67100-08 Strut only Note:  Each kit does (1) strut

TP44NS-2 Piper PA44 Nose strut service kit. The TP44NS-2  strut service kit replaces worn or leaking O-rings on the PA44 Nose strut This kit is for  the 67100-13 Strut only Note:  Each kit does (1) strut

For the Piper PA 24-180 and -250 series main struts.  The kut contains the orings and seals for (1) strut

Rebuild yourPiper PA24-260 and -400 series with this strut kit for  main struts.   This kit is for (1) strut.   

Kit contains O-rings for the PA31 and PA42 Series. These kits vary in amount of O-rings.

A kit to replace worn O-rings on a Piper PA44-1180 series with a 455-968 master cylinder.

A kit to replace worn O-rings on a Piper PA44-180 series with a 455-944 master cylinder.

A kit to replace worn O-rings on a Piper PA44-180 series with a 455-948 master cylinder.

Kit contains O-rings for the PA44-180/180T. These kits vary in amount of O-rings.

The RA066-11200 Brake Linings replaced the Cleveland (66-112) Lining, which is organic. These new linings fit into the Cleveland 30-59 and 30-53 Series Brake Assemblies. The Series Brake Assemblies are used on: the Beech skipper Model 77, Beech...

The RA066-14100 Brake Linings replaced the Cleveland (66-141) Lining, which is organic. These new linings fit into the Cleveland 30-239 Series Brake Assembly. The Series Brake Assembly is used on the Cirrus SR20. This new Brake Lining should improve...

FAA-PMA Approved Replacement. Fits: DeHavilland DHC6-100, -200, -300 Twin Otter and on the Beech D18, E18, G18, H18, C45, TC45, 3N, 3NMAIRCRAFT using the 199-141 STC Kit.   Mounting Hole Diameter: 3/8" Packaged in boxes of 10

RA-66-105 Lining      FAA-PMA approved replacement linings for Cleveland & McCauley. The linings EXCEED OEM performance standards and meet the airworthiness requirements. Click here for the RA-105-002 rivets for this lining

FAA-PMA approved replacement linings for Cleveland & McCauley. The linings EXCEED OEM performance standards and meet the airworthiness requirements. Click here for the RA-105-002 rivets for this lining

FAA-PMA approved replacement linings for Cleveland & McCauley. The linings EXCEED OEM performance standards and meet the airworthiness requirements. Alternate Name: RA66-30026

RA-66-111 Lining FAA-PMA approved replacement linings for Cleveland & McCauley. The linings EXCEED OEM performance standards and meet the airworthiness requirements. Click here for the RA-105-002 rivets for this lining

FAA-PMA approved replacement linings for Cleveland & McCauley. The linings EXCEED OEM performance standards and meet the airworthiness requirements.

FAA-PMA approved replacement linings for Cleveland & McCauley. The linings EXCEED OEM performance standards and meet the airworthiness requirements.

The RA66-44 brake lining is a FAA-PMA approved replacement linings for Cleveland & McCauley. The linings EXCEED OEM performance standards and meet the airworthiness requirements.

Rapco RA66-62 Brake Lining.  FAA-PMA approved replacement linings for Cleveland & McCauley. The linings EXCEED OEM performance standards and meet the airworthiness requirements.

FAA-PMA Approved Replacement. Fits: Cessna Conquest l, 425 using the (Brake 30-113 & 30-113A) Cessna Businessliner 404 using the 199-78 STC Kit (Brake 30-97) Mounting Hole Diameter: 3/8" Sells 10 Per Box as well